Service and Repair Pricing

This applies to all two-stroke two-cylinder personal watercraft except for Sea-Doo (see below). It includes the following:

 
• Charge/test battery and charging system
• Compression test and change spark plugs
• Lube and adjust all cables
• Inspect and adjust oil injection
• Inspect and lube pump, prop, intake grate and wear ring
• Inspect exhaust system for leaks
• Grease PTO and zerk fittings
• Inspect fuel system and clean sediment bowl/change fuel filter
• Test run and set idle
• Clean and seal engine bay
• Complete multi-point inspection

This applies to all two-stroke three-cylinder personal watercraft except for Sea-Doo (see below). It includes the following:

 
• Charge/test battery and charging system
• Compression test and change spark plugs
• Lube and adjust all cables
• Inspect and adjust oil injection
• Inspect and lube pump, prop, intake grate and wear ring
• Inspect exhaust system for leaks
• Grease PTO and zerk fittings
• Inspect fuel system and clean sediment bowl/change fuel filter
• Test run and set idle
• Clean and seal engine bay
• Complete multi-point inspection

This applies to all two-stroke Sea-Doo personal watercraft. It includes the following:

 
• Charge/test battery and charging system
• Compression test and change spark plugs
• Change jet pump oil
• Inspect and adjust oil injection
• Lube and adjust all cables
• Inspect and lube pump, prop, intake grate and wear ring
• Inspect exhaust system for leaks
• Grease PTO and zerk fittings
• Inspect fuel system and clean sediment bowl/change fuel filter
• Test run and set idle
• Clean and seal engine bay
• Complete multi-point inspection

This applies to all four-stroke personal watercraft. It includes the following:

 
• Change engine oil and oil filter
• Inspect and change air filter (if applicable)
• Charge/test battery and charging system
• Compression test and change spark plugs (if applicable)
• Lube and adjust all cables
• Inspect and lube pump, prop, intake grate and wear ring
• Inspect exhaust system for leaks
• Lube throttle body
• Grease PTO/lube carbon ring and zerk fittings
• Inspect fuel system and clean sediment bowl/change fuel filter
• Test run and set idle
• Clean and seal engine bay
• Complete multi-point inspection

This applies to all two-stroke stand up jet skis. It includes the following:

 
• Charge/test battery and charging system
• Compression test and change spark plugs
• Inspect and adjust oil injection
• Lube and adjust all cables
• Inspect and lube pump, prop, intake grate and wear ring
• Inspect exhaust system for leaks
• Grease PTO and zerk fittings
• Inspect fuel system and clean sediment bowl/change fuel filter
• Test run and set idle
• Clean and seal engine bay
• Complete multi-point inspection

Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

28mm with external fuel pump or 38mm/42mm models. Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee. 28mm model includes rebuilding the external fuel pump.

Late models with an accelerator pump are an additional $25. Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

Models with an accelerator pump are an additional $25. Early models with "I-Series" carbs are an additional $35. Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

With or without accelerator pump. Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

Models with "I-Series" carbs are an additional $75. Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

Models with non power valve engine. Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

Models with power valve engine. Cat removal plate and chip highly recomended to be install at same time. Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components, jets reamed, all surfaces cleaned, all passages cleared, replacement of worn parts, pressure test, and reassembly. Ultrasonic cleaning available, if necessary, for an additional fee.

Includes removal and installation of the pump, inspection of the driveshaft, prop repair, and inspection of pump shaft, bearings and seals.

Includes removal and installation of the pump, inspection of the driveshaft, prop repair, and inspection of pump shaft, bearings and seals.

Includes repair and reshaping of stator veins.

Includes complete water extraction process, compression test, internal inspection of cylinders and new spark plugs.

Includes complete water extraction process, internal inspection of cylinders, oil and filter change and new spark plugs.